---
title: Halbach-Type Helical Micro-Undulators
url: https://www.emergentmind.com/topics/halbach-type-helical-micro-undulators
type: topic
---

# Halbach-Type Helical Micro-Undulators

Searching arXiv for recent papers on helical micro-undulators and Halbach-type undulators.
arxiv_search(query="Halbach helical micro-undulator NdFeB helical undulator APPLE-II", max_results=10)
Halbach-type helical micro-undulators are short-period permanent-magnet undulators in which helical field geometry is combined with Halbach field concentration, so that a rotating transverse field is strengthened inside a small bore while the external field is reduced or nearly canceled. In the recent helical-magnet literature, the topic is anchored by prototype NdFeB helices machined from single cylinders, first as a two-helix experimental undulator and then as 6 mm-period microundulators, together with analytic and CST-based studies of a four-helix Halbach-type architecture for millimeter-scale periods [2508.00232]. The central technical objective is to obtain on-axis fields of order \(1\ \mathrm{T}\) or higher at periods of a few millimeters, with equal-amplitude orthogonal transverse components and near-circular polarization on axis, for compact FEL operation from the EUV to the soft X-ray and X-ray ranges [2508.00232].

## 1. Concept and magnetic architecture

The experimentally demonstrated baseline configuration is a two-helix device made from two identical helices cut from a single NdFeB cylinder and then longitudinally magnetized. In the 2025 prototype study, the two helices are oppositely magnetized and shifted along \(z\) by half a period, which doubles the fundamental helical field amplitude on axis relative to a single helix. The resulting field is transverse and rotates along \(z\), with equal \(x\) and \(y\) components phase-shifted by \(90^\circ\) [2508.00232].

The Halbach-type target architecture is a four-helix array. It is described as a helical analogue of a Halbach array formed by \(N_h = 4\) helices arranged with alternating axial and radial magnetizations, each with quarter-period axial width \(a=d/4\). Two helices carry axial magnetization \((\pm M_z)\), and two carry radial magnetization \((\pm M_r)\). The arrangement exploits the fact that, on axis, the radial magnetization contribution is larger than the axial one, and combines them in the proper phase to maximize the rotating transverse field and achieve circular polarization on axis [2508.00232].

A later implementation paper distinguishes sharply between helical and Halbach-like realizations. Its two-helix 6 mm-period microundulator is explicitly “not Halbach-type” because it produces a significant external field, whereas its hybrid four-helix device, composed of two oppositely longitudinally premagnetized NdFeB helices alternating with two unmagnetized steel helices, is described as Halbach-like because the external field is “virtually zero” while the internal field is strongly enhanced [2509.06186]. That distinction is important: not every helical micro-undulator is Halbach-type, even if it produces a strong rotating on-axis field.

| Configuration | Magnetic composition | Reported on-axis outcome |
|---|---|---|
| Two-helix prototype | Two identical NdFeB helices, oppositely longitudinally magnetized, half-period shift | \(B_0 \approx 0.53\ \mathrm{T}\), \(K \approx 0.99\), \(\lambda_u = 20\ \mathrm{mm}\), inner diameter \(8\ \mathrm{mm}\) |
| Four-helix Halbach-type target | Two axial \((\pm M_z)\) and two radial \((\pm M_r)\) helices, \(a=d/4\) | \(B_0 \approx 1\ \mathrm{T}\), \(K \approx 0.28\text{–}0.6\), \(\lambda_u = 3\text{–}6\ \mathrm{mm}\) |
| 6 mm two-helix microundulator | Two axially magnetized NdFeB helices | \(B_0 \approx 0.93\text{–}0.95\ \mathrm{T}\), significant external field |
| 6 mm hybrid microundulator | Two premagnetized NdFeB helices plus two high-permeability steel helices | \(B_0 \approx 1.5\ \mathrm{T}\), external field essentially canceled |

The hybrid architecture is presented as a practical substitute for true radial premagnetization, which the prototype study identifies as difficult to realize in practice. CST simulations are reported to show that the hybrid’s on-axis field closely matches the ideal Halbach-type configuration; in the later 6 mm implementation, the hybrid is only about \(7\%\) below the ideal helical Halbach field when all longitudinal widths are equal, and equals the ideal on-axis field after width optimization [2508.00232].

## 2. On-axis field theory and Halbach enhancement

The analytic formulation in the prototype paper treats uniformly magnetized helices with rectangular cross-section and finite thickness. For a right-handed helix with period \(d\), axial width \(a\), inner radius \(R_1\), outer radius \(R_2\), magnetization \(M\), and wavenumber \(h=2\pi/d\), the definitions are
\[
\zeta = hz,\qquad \eta = ha/2,\qquad \xi_1 = hR_1,\qquad \xi_2 = hR_2,\qquad B=\mu_0 M.
\]
With \(K_1(\xi)\) the modified Bessel function of the second kind of order 1 and \(K_1'(\xi)\) its derivative, the on-axis field of a single longitudinally magnetized helix is
\[
\vec{B}_u^{\,z}(z)=B\,\mathrm{sign}(M_z)\,\frac{\sin\eta}{\pi}\,\int_{\xi_1}^{\xi_2}\xi K_1(\xi)\,d\xi\,\big[\hat{x}\sin\zeta+\hat{y}\cos\zeta\big],
\]
and the on-axis field of a single radially magnetized helix is
\[
\vec{B}_u^{\,r}(z)=B\,\mathrm{sign}(M_r)\,\frac{\sin\eta}{\pi}\,\int_{\xi_1}^{\xi_2}\xi K_1'(\xi)\,d\xi\,\big[-\hat{x}\cos\zeta+\hat{y}\sin\zeta\big].
\]
These expressions already generate a rotating transverse field on axis; the radial-magnetized helix gives a somewhat larger amplitude than the longitudinally magnetized one for the same geometry, and a pair of identical helices with opposite magnetization and a half-period axial shift doubles the amplitude [2508.00232].

Within this framework, the magnetic scaling is geometric rather than empirical. Shrinking the period \(d\) increases \(h=2\pi/d\) and changes \(\xi_{1,2}=hR_{1,2}\), which generally strengthens the field for fixed aperture. Reducing the inner radius \(R_1\) increases \(\xi_1\) and boosts the relevant integral, but is constrained by beam aperture and tolerances. Increasing the magnet thickness \(R_2-R_1\) increases \(\xi_2\) and raises the integral [2508.00232]. The 2025 implementation paper presents the same scaling intuition in a Halbach-cylinder context and notes that, as \(d\) shrinks at fixed bore, the Bessel-function weighting ultimately limits \(B_0\) [2509.06186].

A specific comparative result against planar Halbach undulators is also reported. For equal gap and magnet thickness, the ratio of the on-axis helical circular-component amplitude to the planar linear-component amplitude reaches a minimum of \(\rho \approx 1.17\), so the helical Halbach array is stronger in that comparison and simultaneously produces equal \(x\) and \(y\) components for circular polarization [2508.00232]. The same study further reports that the gap required to reach \(B_0=1\ \mathrm{T}\) is smaller for the Halbach-type helical configuration than for a planar Halbach of equal thickness.

## 3. Fabrication methods and assembly constraints

The enabling fabrication method is WEDM. The prototype study states that wire electrical discharge machining, combined with a flat tool and rotary motion of the workpiece, made it possible to achieve high precision in the manufacture of NdFeB helices. Two identical helices are produced from a single cylinder via a thin spiral cut, ensuring matched geometry and phasing [2508.00232].

The later microundulator implementation gives more detailed process parameters. The helices are cut from solid cylinders by EDM drilling to form the 1 mm bore and by high-precision WEDM to form the helical structure, using a \(0.25\ \mathrm{mm}\) brass wire, pulse current of about \(12\ \mathrm{A}\), pulse duration \(10\text{–}40\ \mu\mathrm{s}\), wire tension \(1.5\ \mathrm{N}\), feed rate \(1.5\ \mathrm{m/min}\), longitudinal cutting speed about \(80\ \mu\mathrm{m/min}\), and a dielectric oil environment, with micron-level dimensional accuracy [2509.06186]. The prototype paper additionally notes that WEDM can achieve periods down to about \(1\ \mathrm{mm}\), with damage confined to a very thin micrometer-scale surface layer [2508.00232].

Magnetization is applied after machining. In the 20 mm-period prototype, several \(2\ \mathrm{ms}\) pulses with peak field \(>2\ \mathrm{T}\) yielded magnetization saturation for NdFeB with \(B_r \approx 1.4\ \mathrm{T}\) [2508.00232]. In the 6 mm devices, axial premagnetization is again performed with pulsed solenoids in the \(2\text{–}3\ \mathrm{T}\) range [2509.06186]. Post-machining magnetization avoids thermal and demagnetization risks during cutting, a practical point emphasized in the prototype paper.

Assembly forces are nontrivial. For the 20 mm device, CST predicts about \(96\ \mathrm{N}\) repulsive force at zero offset, rising to about \(160\ \mathrm{N}\) mid-insertion; the force at zero offset remains about \(100\ \mathrm{N}\) and is only weakly dependent on the number of periods, while decreasing with shorter period [2508.00232]. The two-helix prototypes were assembled on a central stainless rod and, in the later work, by “screwing” one helix into the other. These details indicate that mechanical phasing and collision avoidance are central parts of the technology, not secondary engineering steps.

## 4. Experimental realizations and measured field levels

The first experimental realization reported for this class is the two-helix NdFeB prototype with \(\lambda_u = 20\ \mathrm{mm}\), inner radius \(R_1 = 4\ \mathrm{mm}\), outer radius \(R_2 = 16\ \mathrm{mm}\), and length \(40\ \mathrm{mm}\). Hall-probe axial scans of a single helix yielded \(B_u \approx 0.261\ \mathrm{T}\) on axis, in excellent agreement with both analytic calculation \((0.261\ \mathrm{T})\) and CST \((0.258\ \mathrm{T})\). The assembled two-helix configuration doubled the amplitude to \(B_0 \approx 0.53\ \mathrm{T}\), again matching analytic and CST predictions [2508.00232]. With \(\lambda_u = 20\ \mathrm{mm} = 2.0\ \mathrm{cm}\), the undulator parameter is
\[
K=\frac{eB_0\lambda_u}{2\pi m_e c}\approx 0.934\,B_0[\mathrm{T}]\,\lambda_u[\mathrm{cm}],
\]
so \(K \approx 0.99\), close to unity [2508.00232].

The micro-undulator implementation moves to \(\lambda_u = 6\ \mathrm{mm}\) and a \(1\ \mathrm{mm}\) bore. In the two-helix device, the helices have \(R_1=0.5\ \mathrm{mm}\), \(R_2=4\ \mathrm{mm}\), and \(a=d/2=3\ \mathrm{mm}\), with simulated on-axis field \(B_0 \approx 0.93\text{–}0.95\ \mathrm{T}\); external-field measurements confirm that the on-axis field exceeds \(0.93\ \mathrm{T}\) [2509.06186]. In the hybrid device, two premagnetized NdFeB helices of outer radius \(10\ \mathrm{mm}\) alternate with high-permeability steel helices of outer radius \(4\ \mathrm{mm}\), all through the same \(1\ \mathrm{mm}\) bore. Combined measurements and CST comparisons indicate \(B_0 \approx 1.5\ \mathrm{T}\) on axis with about \(5\%\) uncertainty, while the external field is essentially canceled [2509.06186].

The measurement methodology itself becomes part of the subject at small bore. For the two-helix microundulator, external scans were made with a Senis 3MTS handheld teslameter at \(r=5\ \mathrm{mm}\) from the axis. For internal near-axis sampling in the 1 mm bore, a 3D Hall sensor was inserted radially and translated along \(z\) while the helix was synchronously rotated according to \(\Delta\theta=(2\pi/d)\Delta z\), so that the probe remained near a fixed helical phase [2509.06186]. This technique is a direct response to the metrology constraints created by sub-millimeter apertures.

## 5. Undulator physics, polarization, and FEL relevance

For a helical undulator, the resonance relation used in the prototype paper is
\[
\lambda_n=\frac{\lambda_u}{2n\gamma^2}(1+K^2),
\]
with odd harmonics dominating on axis and the fundamental \((n=1)\) circularly polarized [2508.00232]. The paper gives numerical examples for \(\lambda_u=3\ \mathrm{mm}\), \(B_0=1\ \mathrm{T}\), implying \(K\approx 0.28\): at \(100\ \mathrm{MeV}\), \(\lambda_1\approx 42.3\ \mathrm{nm}\) \((29.3\ \mathrm{eV})\); at \(500\ \mathrm{MeV}\), \(\lambda_1\approx 1.69\ \mathrm{nm}\) \((734\ \mathrm{eV})\); and at \(1\ \mathrm{GeV}\), \(\lambda_1\approx 0.423\ \mathrm{nm}\) \((\approx 2.93\ \mathrm{keV})\) [2508.00232]. For \(\lambda_u=6\ \mathrm{mm}\) and \(K=0.6\), the corresponding fundamental spans \(106.6\ \mathrm{nm}\) at \(100\ \mathrm{MeV}\), \(4.27\ \mathrm{nm}\) at \(500\ \mathrm{MeV}\), and \(1.07\ \mathrm{nm}\) at \(1\ \mathrm{GeV}\).

A broader FEL-theory context comes from the three-dimensional, time-dependent formulation for planar, helical, and elliptical undulators developed in “Three-Dimensional, Time-Dependent Simulation of Free-Electron Lasers with Planar, Helical, and Elliptical Undulators” [1611.01649]. That work models APPLE-II polarization control as the superposition of two orthogonal Halbach arrays phase-shifted by \(\phi\), with \(\phi=0\) planar and \(\phi=\pi/2\) helical. It gives the elliptical resonance condition
\[
\lambda_r=\frac{\lambda_u}{2\gamma^2}\left[1+\frac{(1+u^2)K^2}{2}\right],
\]
and a generalized coupling factor
\[
JJ(u)=J_0(\xi)-\frac{1-u^2}{1+u^2}J_1(\xi),
\qquad
\xi=\frac{[(1-u^2)K^2/4]}{[1+(1+u^2)K^2/2]}.
\]
In that formulation, \(JJ\to 1\) in the helical limit, and the simulations show that power grows faster and saturates earlier as ellipticity increases from planar to helical [1611.01649]. This is directly relevant to Halbach-type helical micro-undulators because their principal attraction is not only field strength at short period, but also stronger helical coupling.

The 6 mm hybrid implementation paper makes that implication concrete through an ultra-compact SASE XFEL concept. For a \(1.6\ \mathrm{GeV}\) beam, \(4.7\ \mathrm{pC}\) microbunch charge, rms bunch length \(140\ \mathrm{nm}\), peak current about \(4\ \mathrm{kA}\), and mean spot size \(\sigma_r \approx 4.1\ \mu\mathrm{m}\), the hybrid helical microundulator with \(B_0 \approx 1.5\ \mathrm{T}\) gives \(K \approx 0.84\), \(\lambda_r \approx 5.2\text{–}5.3\ \text{\AA}\), \(\rho \approx 4.1\times 10^{-3}\), gain length about \(6.6\ \mathrm{cm}\), and about \(48\ \mathrm{GW}\) of radiation power in Genesis steady-state calculations; the planar comparison at the same period and peak field gives about \(29\ \mathrm{GW}\) [2509.06186].

## 6. Limits, misconceptions, and research trajectory

Several recurrent simplifications are corrected by the recent literature. First, a helical field does not by itself imply a Halbach configuration. The two-helix devices produce strong rotating on-axis fields but are explicitly described as not Halbach-like externally because they do not suppress the external field; the hybrid four-helix device is the Halbach-like realization because it concentrates the field inside the bore and nearly cancels it outside [2509.06186].

Second, radial premagnetization is not the only route to Halbach-type behavior. The 2025 prototype paper states that realizing radial premagnetization is difficult and therefore proposes a hybrid realization with two longitudinally premagnetized NdFeB helices plus two high-permeability steel or permendur helices [2508.00232]. The later 6 mm implementation shows that this substitution is not merely qualitative: CST gives only about \(7\%\) loss from ideal at equal widths and no on-axis loss after optimization [2509.06186].

Third, short structures remain analytically tractable. The prototype paper states that the on-axis formulas provide good estimates even for shorter structures and notes agreement between analytic expressions, CST, and measurements for relatively few periods, including devices with roughly \(5\text{–}10\) periods [2508.00232]. The 6 mm prototypes, at about 8 periods, are consistent with that claim [2509.06186].

The main limitations are also explicit. Tight tolerances on pitch, axial width, inner radius, and magnetization uniformity are required to preserve spectral purity and circular polarization; WEDM provides micron-level accuracy, but assembly phasing remains critical [2508.00232]. In the hybrid microundulator, steel saturation and end effects must be controlled by geometry optimization in CST [2509.06186]. The later implementation paper further notes that wakefields and phase errors were not quantified. A separate point of emphasis concerns focusing: one paper states that in a perfect helical field the electron undergoes uniform circular motion with focusing in both transverse directions, while the 6 mm XFEL concept assumes no intrinsic focusing from these helical devices and uses a strong FODO quadrupole lattice [2508.00232] [2509.06186]. This suggests that transverse focusing is not treated uniformly across the current prototype and system-design literature.

Taken together, the papers define a clear research trajectory. The experimentally validated 20 mm two-helix system establishes the manufacturability and predictive accuracy of single-piece NdFeB helices; the 6 mm prototypes show that room-temperature microundulators with a 1 mm bore can exceed \(0.93\ \mathrm{T}\) in a simple two-helix geometry and reach about \(1.5\ \mathrm{T}\) in a Halbach-like hybrid; and the FEL modeling literature provides the polarization-dependent resonance and coupling framework needed to assess gain and saturation in compact helical devices [2508.00232]. A plausible implication is that Halbach-type helical micro-undulators are best understood not as a single device, but as a design family spanning ideal radial-magnetization schemes, practical hybrid realizations, and FEL system models that exploit the stronger coupling of helical polarization.

Source: https://www.emergentmind.com/topics/halbach-type-helical-micro-undulators